Factory sights? The rear sight elevation is accomplished by gently lifting the back of the rear sight and sliding the ribbed elevator back or forward to raise or lower the impact of the bullet. Move the rear sight in the direction you want the bullet to go. Up for higher, down for lower.
The windage( left or right) is accomplished by drifting the rear sight in its dovetail slot with a hammer and brass drift punch. Put Duct Tape on the sight or use a small piece of leather between the punch and the sight to prevent damage.. go slowly, a little movement of the sight moves the bullet a lot at 100 yds. Move the rear sight in the direction you want the bullet to go.
On some rifles, the front sight insert can be moved side to side in its base. A special tool called a sight pusher prevents damage to the small insert. You move the front sight the opposite of the way you want the bullet to go.
Of course. XS Systems sells that very sight.
Same as the Marlin 80/780 Except with Bead front sight, made from 1966-1982 Go here for more info. http://www.rimfirecentral.com/forums/forumdisplay.php?f=20
According to my owner's manual for the Marlin Glenfield autoloaders 75C and 60, the model 60 specs are as follows: Length: 40 1/2", Weight: 5 1/2 lbs., Barrel: 22", Front sight: Ramp, Rear sight: Adj. open, Mag. Type: Tubular, Stock: 1 pc. walnut-finish hardwood, Ammunition: .22 L.R., Mag. Capacity: 18. Manual dated 1975.
When in doubt have a qualified gunsmith examine your Marlin model 21 shotgun.It is far cheaper to have it examined,then to loose your eye sight or worse.
The Marlin Model 3000 was the chain-store version of the Model 336. They added a gold trigger, gold bead sight and have no checkering.
Model 80 1934 to 1939 Model 80-E 1934 to 1939 peep sight with hooded front sight Model 80-C 1940 to 1970 semi-beavertail forearm Model 80-DL 1940 to 1965 semi-beavertail forearm with peep sight
Numrich gun parts corp.They may be found on the web.
the value of marlin model 336rc 30 30
behind the rear sight bracked on the left side just above the stock
Pretty close. The CC440 was the version made for and sold by Coast to Coast stores. It has a slightly different sight, wood is a little different.
gunpartscorp.com You can also search for Marlin model 80 parts seeing as how the J.C. Higgins is a clone of the model 80 and Marlin is easier to get parts for. I got a model 80 elevation key for the rear sight from the sight and looked and fit exactly the same as the old one I lost off my J.C.
adjust rear sight up for distance