Goto www.2carpros.com/how_to/power_window.htm
Tale the window regulator out of the truck. Clean an lubricate the tracks & guides. Check for a frayed cable.
Only if you change out the entire regulator. The power regulator unit is pitched a little different due to the power motor components.
You have to disconnect the glass from the regulator or clip the regulator cables.See this post for instructionshttp://www.ricksfreeautorepairadvice.com/repair-topics/window-power-repair/replace-a-power-window-regulator
2 things the new motor is faulty or is a binding regulator
You have to disconnect the glass from the regulator or clip the regulator cables.Here's howhttp://www.ricksfreeautorepairadvice.com/repair-topics/window-power-repair/replace-a-power-window-regulator
Remove the window regulator and motor from the door as an assembly. Drill out rivets that hold motor to regulator and replace motor. Regulator needs to be riveted back into door for reassembly
usually by replacing window regulator.
No you can't.
no there is a left and right if you moved one to the other side the track for the window would face toward the out side of truck window would not mount to regulator.
Remove the window regulator assembly from the door.Remove the motor from the regulator by drilling out the attaching rivets with a 3/16 in. drill bit.Connect the window motor to the regulator with 3/16 in. rivets.Install the window regulator assembly.
window regulator
If the regulator is broken, you'll have to clip the cables to get to the window glass attaching bolts.Here's how to do ithttp://www.ricksfreeautorepairadvice.com/repair-topics/window-power-repair/replace-a-power-window-regulator