Well, I have a 92 probe and the driver side window doesn't work. I looked online for an answer and came up empty, I removed the inner panel from the door frame and found the problem was a bad motor (I checked all the wire functionality against opposite window). The only thing I could do (after searching in vain for a new motor), was to visit pick&pull and the junk yards till I found another probe,.. yanked the mechanism for a total cost of $10 and replaced mine :)
REMOVED THE DOOR TRIM IF THE MOTOR WAS REPLACED BEFORE ,THERE SHOULD BE 3 HOLES DRILLED OUT TO ACCESS THE MOTOR. IF NOT. LOOK FOR THREE LITTLE DIMPLES AROUND THE MOTOR AREA. AND DRILLED 3 HOLES BIG ENOUGH TO FIT A 8MM SOCKET. REMOVED THE 3SCREWS WITH THE 8MMM SOCKET AND DISCOUNTED THE MOTOR AND PUSH THE MOTOR OUT.
P235/75R15
are there tires to fit on my 1994 ford f150 pickup truck besides 235/75/15
www.motorcraft.com shows ( .054 inch )
i believe it is behind the passenger side kick panel ,most ford trucks are.
I believe that is in the right front passenger footwell , behind ( or by ) the kick panel
Ford F150 Pickup.
You would have to check the bolt pattern out for sure. But I'm really sure they wont work.
500.000 trucks
How do I locate the heater blend door actuator in a Ford f150 pickup
The inertia switch is located on the driver's side of the firewall to the left of the brake pedal or behine the right kick panel.
.044 inch
Yes.