They are bolted from the inside you need to take of interior panel first
After you take the headlight out, remove the metal clips holding the lens on. The lens has to be pried off because there is silicone there to keep it together
I Figured it out. The dome light lens is hinged on the passenger side so you just pry the driver's side of the lens out and down to replace the bulb. The lens does not come completely like on other models.
The taillights are an assembly. The lens covers can not be replaced separately
The lens is only available as the whole fog lamp. You have to remove the bumper to replace it.
some of them had a glove box light inside the glove box.
THERE IS NO PARKING LIGHT LENSE FOR THE REAR. IT'S ONLY THE TAIL LAMP ASSEMBLY!
To replace the brake light on a 2001 Dodge Durango the light lens must be removed. It is held on by a clip on one side and a hinge on another. It opens like a door to access the brake light housing.
The tail light is an assembly. The lens is not removable. To replace a bulb you remove the assembly by opening the liftgate, removing two fasteners, and pulling the light rearward.
The tail light is an assembly. The lens does not come off separately. The assembly is removed by lowering the tail gate, removing two screws, and pulling lamp rearward.
Light goes in the lens, refraction occurs, and the light exits the lens.
If you are talking about the tail light the lens is not a separate part of the lamp assy. Replace the complete assy by removing the two screws on the outside and unpluging the lamp socket.
Concave lenses