if you have taken the battery out of your remote you will have to take it to the dealer it has no memory after you take the battery out. dealer told me if i would have changed it out in about 5 seconds it might have saved its memory. i found out the hard way
You can get info on how to program any remote for vehciles at programyourremote.com all info needed was there and made it easy.
how do program 2005 Toyota Prado remote control
You have to have the dealership program a key less entry remote for 2011 Toyota Camry.
I can't add it
I HAVE BEEN TO PROGRAM 2 REMOTE CONTROL FOR TOYOTA SIENNA 2002 BUT I CAN"T DO THAT. WHEN I ACTIVE 1 Y UNDER ONE NO ACTIVED
Try this site... http://www.cars101.com/subaru/keyless.html#alpine used it to program a remote for my 2005 Outback Wagon
Go to dealer.
A keyless entry remote on a 2001 Toyota Sequoia can not be reprogrammed at home. The key must be taken to a dealership where the engineers can program it with new settings.
take it to the dealership
http://www.automotivehelper.com/topic360771.htm
To program the remote for a MCV20 / SXV20 camry you need the master programmed key (it's the black one you would have gotten originally with the car. you place the key in the ignition with the headlights off and the interior light off turn the car from "off" to "on" 3 or 5 times rapidly (but do not start the car). the dash security light will come on and stay on. this means the car is in program mode. you then simply press the remote button and your new remote is now programmed. additional: your old remote will not work unless you programme it at the same time as the new one.
It is necessary to have ALL (maximum of four-original and/or new) of your remote transmitters available prior to beginning this procedure To program the transmitters yourself: # Insert a key in the ignition and turn from 3(Off) to 4(On) eight times in rapid succession (within 10 seconds) with the eighth turn ending in the 4(On) position. # The doors will lock/unlock to confirm that programming mode has been entered. # Within 20 seconds, program a remote transmitter by pressing any button on a transmitter. The doors will lock/unlock to confirm that the remote transmitter has been programmed. (If more than 20 seconds pass before pressing a remote transmitter button, the programming mode will exit and the procedure will have to be repeated.) # Repeat the previous step to program additional remote transmitters. The doors will lock/unlock to confirm that each remote transmitter has been programmed. # When you have completed programming the remote transmitters, turn th ignition to 3(Off) or wait 20 seconds. Again the doors will lock/unlock to confirm programming has been completed. That's it!