Starter = Removal & Installation = 1. Disconnect the negative battery cable. 2. Raise and safely support the vehicle. 3. Remove the starter terminal cover. 4. Remove the terminal nut and separate the battery starter cable from the starter motor. 5. Disconnect the solenoid (S) terminal connector, if equipped with a starter mounted solenoid. Ø To disconnect the hard-shell connector from the solenoid (S) terminal, grasp the plastic shell and pull off; do not pull on the wire. Pull straight off to prevent damage to the connector and (S) terminal. 6. Remove the starter motor retaining bolts. 7. Remove the starter motor from the vehicle. To Install: 8. Place the starter motor in position and install the starter motor retaining bolts. Tighten the bolts to 15-20 ft. lbs. (20-27 Nm). 9. Install the battery starter cable and a terminal nut to the starter motor. Tighten the terminal nuts to 79 inch lbs. (9 Nm). 10. Connect the solenoid (S) terminal connector, if equipped with a starter mounted solenoid. 11. Install the starter solenoid safety cap. If equipped. 12. Lower the vehicle. 13. Connect the negative battery cable. 14. Start the engine several times to check starter motor operation.
How do you replace starter in 1997 BMW 740il??
How does one remove and replace the starter in the 1997 Bravada??
check your starter or starter relay.
The starter have a bad rep But you can replace the relay and clean the connections but 9 out of 10 times it's the starter itself.
How do you replace a starter in a 1997 F-350 Turbo Pickup?
half inch..
no, I want to know, where do i start?
Where is the starter on a 1997 Honda Civic?
The starter relay is inside the starter. You will need to replace the starter.
it can cost any were from 200 to 450 to replace the starter.
It is a 1997 f150 with a 4.6
how do you replace the freeze plugs between the transmision and motor on a 1997 f150 5.4