The Radio has several buttons with numbers on them. These number can be used to set a pre-set number for the station you want. Dial the station you want to set, press and hold the pre-set number about 3 seconds. You will hear a beep, indicating the selection has been set. This can be done for each band. Press the Band to change to another band, then select your pre-set.
Call the dealership and give them your VIN number and they should be able to give you the radio code.
with the radio s/n number you will have to get the reset code through a Honda dealer with the radio s/n number you will have to get the reset code through a Honda dealer
You have to go to a Honda dealer and they will give you the code.
Open the trunk and check to see if the code is on the underside of the trunk lid. (That is where I find the code to my Honda Accord) If you do not have the code click the link, sign up at the Honda Owner's Link, and then click get radio code.
Your dealer should have provided you this on a card.
Turn the radio off and then while holding down numbers 1 and 6 turn the radio back on. This will display the 10 digit radio serial number 5 digits at a time. Each 5 digit code will flash 3 times alternately. If you do not have your radio code you will want to write these numbers down so that you can contact the dealer and obtain your radio code. After the radio serial code has cycled your radio should now read CODE prompting you for the radio code. Once you enter the 5 digit code the radio should work. Of course your presets have been wiped out so you'll need to reset those.
The code varies from car to car. You will need to contact the local Honda dealership to see if they can provide you the code to reset the Pilot's radio.
By using the radio preset buttons to insert the 5 digit code. If you do not have the code click the link, sign up at the Honda Owner's Link, and then click get radio code.
You don't program it, you simply insert the code with the radio presets.
You cannot reset the radio without the code. But it is very easy to get the code. Go to the Honda owners website and register your Honda. After you register it click the link on the left Retrieve Radio/Navi Code. Click the link below.
I needed the code for my radio about a month ago, I called my Honda dealer with my VIN and they gave me the code for the radio.
with the radio s/n number you will have to get the reset code through a Honda dealer with the radio s/n number you will have to get the reset code through a Honda dealer
Power the radio, and then enter the anti-theft code using the preset numbers at the bottom of the radio. If the anti-theft code is unknown, contact Honda with the 17-digit vehicle identification number.
There is nothing to reset except the radio. Insert the 5 digit radio code to reset the radio and then reset the clock and presets for stations.
You have to go to a Honda dealer and they will give you the code.
Insert the 5 digit code in the radio with the radio presets. If you do not have the code then go to honda owners link and register your Honda. There you can get the code for free. Click the link to sign up.
To reset the radio code in a 98 Honda CR-V, one will need to remove the radio and get the serial number off the radio. Inside the glove box, one can find a small white sticker that has the code in it.
To reset the radio in your Honda you will need the security code for the radio. This usually is included in the car's manual or you can also go to Honda's website and input your car's VIN number to retrieve the code. Once you have the code the car manual will walk you through the steps of resetting the radio.