Check with your parts store. Most carry at retofit kit.
wer is the spout connector on 1992 ford e150 v8 5.0 liter
you can buy a kit at your local auto parts store for around $40.00, you have to vacuum pump out what R-12 that might be present. then follow the instructions in the kit.
IN-LINE? WHAT MODEL CHEVY? The 1992 Chevy 4.3 Liter is a V6 and not an inline 6. The firing order is 1-6-5-4-3-2
134a first came on some new cars in 1992. By 1995 all cars had it
my 93 is a inline 6 high output engine but 94s could have had a v6
It depends on the oil pan, but most of them take 5 quarts. My 1992 F-150 with a 4.9 liter (300 ci) inline 6 takes 6 quarts of oil with a filter change
If it hasn't been converted to R-134 if will have to be
R-134a (1990 CLEAN AIR ACT) Most cars after 1992 have R-134a
if it has 134a hose connections, then it takes 134a. if it has the regular thread couplers then it should still have r12 in the system
all vehicles made after 1992 use 134a before 1992 use r-12 and require a specialist.
For a 1992 Ford E-150 with the 4.9 liter / 300 cubic inch inline six cylinder : The firing order is ( 1 - 5 - 3 - 6 - 2 - 4 ) The distributor rotor turns CLOCKWISE ( when looking from the top ) The marked # 1 position on the distributor cap faces AWAY from the engine The engine cylinders are numbered 1 to 6 , from front to rear
You would need to remove the fuel tank, remove the pump from the in tank module, and modify the module. It is easier to repair it correctly.