It will have to be somehow attached to the throttle valve. Clamp the cable so that it doesnt moves then attach it to the vavle and it should go back and forth. The more the valve is openend then the more rpms it should have. Good luck.
There is no aftermarket for this carburetor kit at this time. It is only available from Briggs & Stratton.
The benefit of rebuilding a Briggs and Stratton carburetor is two-fold. The first benefit is the experience you can by doing the handy work on your own. The second benefit is that you save money on labor expenses.
If you mean Briggs and Stratton model 193702, then you want Briggs Stratton Carburetor Part No. 491590 It costs less than $150 USD. Check out http://www.smallenginesuppliers.com or the Briggs and Stratton website.
A Briggs and Stratton L head twin engine wills pit gas out of the carburetor and flood out when starting if the diaphragm has been damaged. This will cause excessive fuel to enter the carburetor.
You need to either adjust your carburetor richer or leaner while at full throttle.
My engine is idling too high. How do I adjust the idle speed?
with a big freagin hammer
It is a Briggs & Stratton Engine, so get the engine model and try jackssmallengines.com.
(1) Remove the air filter and housing (2) Loosen the cable bracket (3) Remove the throttle and choke cables from the carburetor (4) Remove the governor spring from the carburetor (5) Remove the two bolts that fasten the carburetor to the engine. CAUTION: Do not stretch or bend the governor spring while removing or re-installing.
Is the rumor true? Is Briggs Stratton going out of Business?? We were told not to by lawn mowers with the Briggs stratton motors.
Clean out the carburetor with gas, the reason it wont keep running is its not getting enough gas through the carburetor.
No, never oil the carburetor linkage. Clean the linkage throughly with carburetor cleaner. If you oil the linkage it will become clogged with dust which the oil will attract.