The 1985 Chevrolet Corvette rocker arms will have an adjustment screw on top of each rocker arm. Turning the adjustment screw will change the height of the rocker arm.
water temperature in 85 corvette
On intake manifold.
Gm does not use inertia switches.
hydraulic lifter non roller
Head lights
== ==
According to my Alldata system maintenance charts, the 85 Corvette OD manual trans uses Dexron IIE automatic trans fluid. HTH
If the 85 is a similar bodystyle to the 86, yes.
get on ur kneese
on my 85 its behind the plastic thing on the top of the place were your feet go
There probably "pressed in" so take a couple of old nuts or balls from the rocker arm, put the nuts on the shaft, then put the rocker nut on and just tighten it up, it willl pull the shaft out of the head. Good Luck
shift linkage needs adjustment, not expensive