Under the vehicle you will find where the one cable coming from the handle splits into two. There should be a long bolt on the one cable side with a nut on either side of the yolk where it becomes two. loosen the nut on the front side and turn the other nut so that it moves the yolk closer to the single cable until any slack is taken up and you should be done.
put your car in reverse and pull the hand brake. done
buy a Commodore!
at the rear brakes. remove wheels, & brake drums, adjust rear brakes to specs, and the E-brake will automatically be adjusted.
how do we adjust hand brakes
you be a weirdo
there is a small long bolt on the left side of the brake handle tighten the nut to adjust
handbrake adjustment on cougar
to adjust the hand brake you first have to loosen the hand brake witch at the hand brake its self. simpley pull back the cover thatr sourounds the hand brake. u will then see a 6mm threaded rod poping out. the nut that is on the end has 2b screwd off. you will need a 10mm socket for this. adjust totaly off then ur brakes will be free. once u have done your rear brakes then u can adjust the hand brake up by tightening the nut until u hav about 3 to 4 clicks.
do you mean cavalier hand brake?
it is a self ajustment each time you put hand brake it is done
HOLD Foot Brake on and pull hand brake on and off 5 or 6 times there is also a cable adjuster under centre console remove box at rear to get to it you may need to service calipers if brake wont adjust hand brake works off front brakes not rear
change hand brake cable citreon relay