on most cars you can take off the complete handle and inside of the handle is the braking mechanism there is a screw with a cable attached to it in various fashions you tighten or loosen that screw until your brake is to your preference
how do i adjust the handbrake of a hyudai elantra 1998 model
Step 1 - Remove the plastic trim around handbrake by pulling it up from the rear it will unclip. Step 2 - There is a 10mm nut you can turn this to adjust the handbrake. A good idea is to park on a flat and then see if the car can be easily pushed with the handbrake released. Step 3 Once the handbrake is adjusted to the correct amount replace the trim and firmly push down on it so it clips back into place. If you find this method does not improve your hand brakes effectiveness you will need to get you rear calipers checked as they may be fualty.
Try Checking the Brake Fluid Level. And Check the Fluid Level sensors Contacts it may be corroded
Which year?
To change the brake lights on a 1997 Volkswagen Polo first locate the brake light housings in the trunk. Remove the plastic covers and unlock the bulbs. Remove the bulbs and install the new brake lights.
with a spanner.
Try looking under the middle console in your car, you should be able to adjust your handbrake from there
1200
New VW Polo for EU market is made in Bratislava, Slovakia.
fit an anchor
i dont no
Cable underneath has a nut(s) to adjust.