There is an adjusting screw on the top of the headlight housing. Turn it left or right to adjust up or down. There is no side to side adjustment.
there is no adjustments on the headlights.
Specify what you mean.
uses a bubble level to aim the headlights.
Greg Aim died in 2005.
Cute Is What We Aim For was created in 2005.
Take it to the dealer and let them put there gauges on them to get them set right.
There are little black rods sticking up by the head lights that have a spot to put a screwdriver in. You turn these rods to aim the headlights correctly.
Park your vehicle approximately 15 feet from your garage door or another wall. Open the hood and on top of both of the headlights you will see adjustment screws. Rotating them will lower/raise the headlights
The are adjustment screws next to the headlight housings. To adjust the headlights either loosen or tight the screws. This will either raise or lower the headlight unit.
You need special equipment to do this correctly. Take it to a dealer for this.
Take it to a dealer or a good body shop. You do not have the proper equipment to do this correctly.
To aim the Mitsubishi Galant Headlights open the engine compartment of the vehicle. Locate the headlights and use a screwdriver on the vertical adjustment screw positioned on top of the headlight. This screw will allow adjustment for position where the light will shine.