FOR ME THERE IS NO WAY TO BLEED A CLUTCH ON A SATURN BUT IF YOU REPALCE ONE PART SOMETIME ITS POSSIBLE. 20 % CHANCE .THE ONLY WAY ITS TO REPLACE THE SLAVE AND THE CYLINDER AS A SEALED KIT
how do you bleed a cluch on a 92 Saturn sl
bleed clutch Saturn vue 2003
From what I have heard you cannot bleed the clutch in a Saturn because it is all one peice. this was form a Saturn mechanic. hope it helps.
There is not any adjustment on this clutch. Al you have to do is bleed the system.
pray like hell
show me pictures
at the slave cylinder, you will need to remove the clutch inspection plate to do so.
unfortunately Saturn went out on a limb to produce easy swappable parts in their cars. the clutch hydraulic system can not be bleed. it was intended on being replaced as an entire unit, filled with fluid and bleed at the factory. I've made many trips the salvage yards to obtain a entire assembly.
On the opposite side of the trans from where the clutch line enters, a fitting with a bleed valve on the end. You can get a great view if you remove the access panel around the shifter, you will be able to see them both from there, loosen the end to bleed.
You don't. The part (if it contains air) has to be replaced. If it's new.. it doesn't need bleeding.
I HAD THE SAME PROBLEM WITH MY 92 WRANGLER.. GO TO AUTOZONE.COM AND CLICK ON SERVICE MANUALS, THEY WILL EXPLAIN HOW TO BLEED THE SLAVE CYLINDER.. AND IT WORKS.. DON DRC@EPIX.NET
The clutch hydraulic unit cannot be bled properly It should be replaced as a unit You can try (with) an adapter to put vacuum on the reservoir but it most likely won't work The Saturn manual says it cannot be bled and must be replaced as a unit.