0
How do you bleed the clutch slave cylinder on a 1994 Mitsubishi Eclipse?
Wiki User
∙ 12y ago
Here are some good links to how to do it. But I will try and explain it also. The simplest way is to have someone pump the clutch pedal about 7 time and then have them hold the pedal to the floor. Use a 10mm wrench to loosen the bleeder valve on the slave cylinder about a quarter turn or so. Some fluid will come out then close the bleeder. Keep an eye on your fluid level and refill as needed. Repeat until you get a solid stream of fluid. Be aware that your clutch hydraulics uses brake fluid and brake fluid eats paint.
http://www.dsmtuners.com/forums/articles-drivetrain/213503-how-properly-bleed-your-hydraulic-clutch.HTML
http://www.dsmtuners.com/forums/articles-drivetrain/199640-how-bleed-your-clutch-yourself.HTML
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
How do you bleed the master cylinder clutch on a 2000 Eclipse RS?
there is a bleeder valve on the right side of the tranny that is where you can bleed your system
How do you replace the slave cylinder in a 1996 Mitsubishi Eclipse RS 20?
Probably remove the transmissionm if its a internal slave, if external then its mounted on the outside of the tranny. The master clutch cylinder is located on the firewall. Bleed the system and pump the hell out of the clutch after installing the new slave. : On a 99 GST it is an external cylinder (2) 10mm bolts remove the line replace cylinder bleed system.
Where and how do you adjust the clutch on a 94 escort?
The clutch can't be adjusted. It is an hydraulic clutch. The clutch pedal sends pressure from the master cylinder to the slave cylinder on the clutch. IF you are having trouble with it the thing to do is bleed the air out at the slave cylinder. Have an assistant pump the clutch and hold it to the floor. Then open the bleed valve on the slave cylinder to let the air out of the system. On the final bleed hold the clutch to the floor and close the bleed valve on the slave cylinder. The clutch master cylinder operates of the brake fluid reservoir. Make sure you keep this full of brake fluid as you bleed the clutch.
When do you bleed your clutch?
after the clutch master cylinder has been replaced.
HI you had a leak in your slave cylinder in the clutch car is Mitsubishi eclipse you got that part replaced 2 days ago but the problem has not solved yet What else could probably go wrong Please help?
did you bleed the system, perhaps you have air in the system.
How do you tell if the clutch master cylinder is gone out on a 87 king-cab Nissan truck?
first check your clutch slave cylinder for leaks, if its leaking ,replace and bleed system,if its not leaking,bleed system ,dont forget to bleed clutch damperand if its still not right, then replace clutch master cylinder.
Why would you have to pump your clutch pedal several times to get the clutch to work on a 1997 Mitsubishi Eclipse RS?
You either have air bubbles in the system or most likely it's your clutch master cylinder. Answer: Could also be a leak in one of the lines a bad slave cylender or just out of fluid..worst case clutch is going look for RPM spikes. easiest fix look for a leak, fix it bleed the clutch.
Where is the clutch master cylinder on 2007 Mazda 3?
how do you bleed the clutch master cylinder in a 2005 mazda 3
How do you bleed the clutch. 2003 Mitsubishi lancer?
same way you bleed the brakes. push clutch all the way to the floor and release the bleed valve on the transmission. tighten it up, release the clutch. Need 2 people to do it.
Where is the clutch bleed valve on a 1988 ford f-150?
On the clutch slave cylinder
How do I bleed a 95 Chevy clutch master cylinder?
Need to know how to assemble 95 Chevy clutch master cylinder?
How do you bleed a clutch on a Nissan stanza?
To bleed a clutch on a Nissan Stanza, you need to find the bleed-off valve, usually somewhere near the slave cylinder.
