1965 ElCamino's did not come from the factory with an ECM. If you have the switch out you may be able to cross the connection that is activated by the metal in the key. On those years the theft deterrent is a piece of metal set into the key that completes a connection inside the ignition switch. If you complete that connection permanantly before installing the switch you wont need the original key.
Check out this web site to purchase anything for your firebird. http://www.youngsfbody.com/
The factory wiring harness for the trailers will plug in under the back of the vehicle in the area of the spare tire, the harness plugs into the wiring harness for the tail lights.
With some modifications anything could happen but is better if you get the dash wiring for the 79 firebird.
PLEASE HELP???.... PLEASE go herehttp://www.installdr.com/hope it helps
Easy way is to go to best buy get you a wiring harness that plugs into your factory harness.
if you are using an aftermarket wiring harness hook up the remote turn on wire on the new radio it should be blue with a white stripe to the harness also has a blue and white stripe and plug it in this wire turns on the factory amplifier if you are not using a harness you will have to locate the internal amplifier wire of the radio and connect that to the remote turn on on the aftermarket radio = answer = the inernal apm power wire is white on the black wire harness ANSWER if you dont want to use the factory amp. just run new speaker wires to each speaker.
you have to buy a aftermarket adapter harness so that you will be able to use all of your accessories that have been linked to your cd player.-Shocker
you need to find the alarm wiring harness and take the fuse out of it
Many aftermarket companies sell adapters for aftermarket wire harnesses. They have the original factory harness at one end and you cennect that to the harness that came with the radio. Check your local car audio installer.
If it doesn't have a trailer plug, it does not have a factory trailer harness.
get the after market wiring harness
Go to wal mart or your local stereo shop and pick up a factory plug in harness for your car, unplug your factory radio and plug in the harness, then you just wire in the aftermarket radio to the open end of the harness.....no cutting wires so you can put the factory radio back in by just unplugging the new one and replacing it
If you have the Xlt you need a harness adapter that wires to the aftermarket radio harness so that it plugs directly into the factory harness for the aerostar.The reason for this is that it has a factory equalizer that can not be bypassed unless you rip it out and run new speaker wires.Scousch makes an adapter for it, the adapter model numbers are FDK4 or FDK2B.
Yes, If your truck did not come with the console from the factory then the harness that is in the headliner will not have the additional wires needed to run the console or the factory auto/dim mirror. Your best bet would be to get the harness out of a similar truck that came with the console or check eBay (alot of the consoles sold on eBay come with the harness)
the easiest way is to go to a local stereo store and buy a wire harness adapter kit. This will connect to the after-market deck wires and then plug into the factory harness plug. If you can't go that way go to www.the 12volt.com and search for the wire colors in their help section.
Standard 2 Piece Harness Up To Late 1990
go to wal-mart they have a harness that plugs into the factory harness and wires to radio
Go to www.installdr.com and they will walk you through it. You need an adapter for a non-Honda radioAnswerPagan Audio (on Ebay) as well as AUTOTOYS on the internet sell "Metra" wiring harness for around $10 ~ $15 That will match your factory harness so you won't have to cut and spice and also have a secondary plug which will plug into the car's factory plug and allow you to retain factory alarm/keyless entry and dome light. AnswerThe harness Pagan Car Audio (Ebay) does not work for a 98. The pigtail harness they sell has a "male" connector and so does the factory keyless entry/alarm harness from the car. You must cut the ground, 12V continuous (yellow) and the ignition (red) wires from both harnesses and connect them for there harness to work, a pain. AnswerI had to keep my stock radio harness in the dash when i replaced mine. The keyless entry sensor is located in the harness.
all u need to do is pull the v6 and the wiring harness out of the car and install v8 with new harness.. v8 will fit right in the v6 frame
Follow the wiring harness from your blinker. Disconnect the factory harness from the relay. Replace with the new relay.
Remove the retaining cover from your factory stereo. Remove the factory stereo retaining bolts. Slide the factory stereo out. Remove the wiring harness and the antenna cable from the back of the factory stereo.
COULD B a Bulb-Flasher- Turnsignal Harness-No-- 12Volts-Bad GROUND.
dont remember the color exactly, but if the factory harness is still there, the clip side that you push in to remove the harness is positive
If you are installing the engine in an exact model that the engine is coming out of, the harness should not be needed. If there are any changes in model, sensors or anything else then the harnesses will not be interchangeable.