To change the water pump on a Chevy Celebrity 2.8L water pump 1987 to 1990:
1. Using a suitable drain pan loosen the drain and allow the coolant to drain.
2. Remove the belt guard above the water pump pulley.
3. Release the tension on the serpentine belt and remove the belt. Take careful note of the routing of the serpentine belt for replacement purposes.
4. Hold the water pump pulley still and remove the bolts that hold it in place.
5. Remove the bolts that hold the water pump in place and remove the pump.
Clean the mounting surface so that a new gasket will seal.
Using a new gasket install the replacement pump
Reinstall the pulley and put the serpentine belt back in place' Put the belt guard back in place.
Refill the radiator with coolant, check for leaks..
The fuel pump on your 1988 Chevy Celebrity is in the fuel tank.
== ==
you need to drop the gas tank down and remove fuel pump from tank.
No Chevy Celebrity ever had a 4.0L engine
I would need to know the year and engine type to answer this question.
what type of engine do you have?? V6
In the fuel tank
The water pump is on the front of the engine.
i need to know what bolts to losen so i can change water pump belt on 1988 Nissan patherfinder
Looking over the right front fender the water pump on a 1987 - 1990 Chevy Celebrity 2.8L v6 is to the right of the power steering pump. There is a cover over the serpentine belt with the belt routing on it. The water pump is below that. Real easy to get to, real easy to change.
Need more info, engine type.
There should be a routing diagram under the hood. If it is the 2.8L V6 the diagram is on a guard above the belt between the power steering pump and the water pump.