Begin by removing the tire and wheel from your Kia. Remove the ball joint retaining nuts. Pound the ball joint out with a hammer. Reverse the process to install your new ball joint.
To change the ball joints on a 2001 Kia Sportage 4x4, first, lift the vehicle and remove the front wheel. Then, disassemble the suspension components by removing the brake caliper, rotor, and any necessary bolts to access the ball joint. Use a ball joint separator or a suitable tool to detach the old ball joint from the control arm and steering knuckle, then install the new ball joint, ensuring it's properly seated. Reassemble all components in reverse order and torque the bolts to the manufacturer's specifications.
The CV joint in a 2000 Kia Sportage can be replace by roving the tires, axle nuts, and the knuckle bolts on the struts. Next, the CV joint can be removed by placing a screwdriver between the transmission and the CV joint will pop out.
You have to replace the lower control did assembly .
To replace the upper control arm on a 2000 Kia Sportage, first, safely lift the vehicle and remove the wheel. Then, disconnect the ball joint at the upper control arm, followed by removing the bolts securing the control arm to the frame. Once the old control arm is removed, position the new control arm in place, secure it with bolts, and reconnect the ball joint. Finally, reattach the wheel and lower the vehicle.
i like to know if there is a diagram or video to change spark plugs on a 2000 kia sportage if there is where can i find it?
how to change transmission filter on a 2000 kia sophia
best of taking it to a mechanic
2000 kia sportage needs 4 1/4 quarts of oil + oil filter.
They say it is after 100.000 Km.
Kia pr
this question has been answered under 2000 kia sportage timing belt replacement.