0
How do you change a cam shaft positioning sensor on a 1988 Oldsmobile Delta 88 3.8L?
Wiki User
∙ 16y ago
See the Related Links for "Here" to the bottom for the answer.
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
Your Oldsmobile delta stalls in warm weather?
you have a sensor problem.
How do you replace a timing chain on a 1998 Oldsmobile delta 88?
How to change a timing chain in a 1998 Oldsmobile delta 88
Where is the throttle positioning sensor on 1990 olds delta 88?
under the throttle body next to the thermosat housing.
1989 Oldsmobile delta 88 crankshaft sensor location?
The Crankshaft sensor is located behind the Harmonic Balancer on the front-passenger side
Where is the map sensor on a 1989 Oldsmobile Delta 88?
At the end of your air cleaner tube is a square box with 4 screws and a plug in. This is your mapp sensor
Where is the EGR valve located on an 89 Oldsmobile delta 88 and is it hard to change?
The 1989 Oldsmobile EGR valve is located on the top of the engine, near the back. It is quite simple to change.
What does fuse 17 control in 1993 delta 88 Oldsmobile?
Fuse 17 in a 1993 delta 88 Oldsmobile controls the air conditioner
Location of a cam sensor on a 1989 Oldsmobile delta 98 3800 v6?
The camshaft position sensor is located behind the water pump pulley. If looking directly at the pulley, it is at about the 10 O'clock position. TechJK ---------------------
What is needed for a complete tune-up for a 1987 Oldsmobile Delta 88?
You will need to change the Oil and filter, spark plugs, spark wires, fuel filter, air filter, oxygen sensor, thermostat, drain flush and refill the cooling system, and (if needed): change the breaks, rotate the tires, and change the transmission fluid.
How do you change a starter in an 1987 88 delta Oldsmobile?
disconnect the battery, then the wires from the starter. Then remove the bolts holding the starter to the engine.
How do you change a crank shaft sensor for a 93 Oldsmobile delta 88 royale?
on a 90 olds 88 royale your sensor sits inside the timing cover...will need to remove the harmonic balancer (need pulley for that) and remove two screws to take sensor out. replace all parts same way they came out and in same order. passenger side of engine in timing cover
What is the miles on a Oldsmobile delta 88?
78000 miles
