It is located behind the crankshaft pulley and requires the pulley to be removed to change it out.
no
The crankshaft pulley is the large pulley on the lower passenger side of the engine.
the crankshaft sensor is located behind the crank pulley. the bottom pulley
The crankshaft position sensor is located at the lower left hand side of the crankshaft pulley. The crankshaft pulley is the large pulley located in the center lower portion of the front of the engine.
The crankshaft pulley has broken causing the outer ring to slide forward into the fan assy. replace your crankshaft pulley and all will be well
The crankshaft pulley unbolts from the harmonic balancer. The harmonic balancer can be removed from the crankshaft with a 3 bolt puller.
The crankshaft pulley is the lowest pulley on the engine. Looking at the engine from the front which is looking at it from the passenger side fender the crank pulley is on the bottom of the engine and has a pulley with a pulley behind it with teeth on it.
Power steering belt to crankshaft pulley. Alternator belt to water pump pulley and to crankshaft. A/C compressor belt to power steering pump and to crankshaft pulley. Smog/Air pump belt to water pump pulley. This is for a truck that had a 2 grove power steering pulley, a 2 grove water pump pulley and a 3 grove crankshaft pulley................
It is on the front of the engine on the end of the crankshaft.
The water pump on that neon is located in the distribution belt with between the camshaft and crankshaft pulley, you have to change also the belt, the problem with that is that it is really difficult to remove the crankshaft pulley, you need a very special extractor for that. Removing the water pump is really easy.
Looking at the bottom side of the front of the engine at the crankshaft pulley, the CKP is at the 10 O'Clock position of the crankshaft pulley