Take the interior door panel off, maybe a screw behind the inside door handle and armrest; window crank clip; carefully pry the rest. Then 3 nuts hold the mirror on.
Call Mr. Goodwrench!
Under the hood
can you change the alternator belt in a 1998 Chevy metro from under the car.
How do you change a Master Cylinder and hydraulic clutch line for a 1998 Chevy S10?
Infront of the drivers seat.
how to change a fuel pump in a 1998 Chevy Corvette
at what mileage do you change a 99 Chevy Tahoe timing chain.
Inside the drivers side frame rail under the truck, aprox under the drivers seat area.
drivers side underneath right in front of the rear tire.
Written in the owners manual and on the drivers door post.
You have to take off the door panel and take the 2 bolts out holding the mirror in place
That would be cylinder #5
how do you change power steering pump for chevy express van 1998 v6
My 1998 E320 drivers side mirror cracked and leaked fluid and so it couldn't respond to high beams from my rear. The delaer wanted about $450 for the mirror. I had a regular mirror made and adhered it to the car's mirror for $20. Works fine!
You will need apply steel glue to reattach the drivers mirror on a 1998 toyota avalon. You can purchase steel glue at walmart or any auto supply shop.
On a 1998 Ford Explorer : ( # 1 ) is a 7.5 amp fuse for the power mirror switch , power antenna ( In the fuse panel in the drivers end of the dash , the fuse panel cover is visible with the drivers door open )
Under the hood, on the firewall, drivers side.
Under dash, drivers side, above e-brake pedal.
Get a manual on your car and get everything correct.
check the fuses.
replace the rear breaks
On the 1996 Hombre, you have to remove the inside door panel. You will see three nuts holding the mirror. Try Advance Auto Parts for replacement mirror (probably same as S-10).
There should be one torx screw on the bottom side of the mirror bracket, remove it and slide the mirror up, if the whole mirror has fallen off go to a parts store and they will have a kit to glue the windshield mount back on, then slide the mirror back on.
slide in under the drivers side of the truck just behind the drivers set and look up inside of the frame rail and you will see it.