Want this question answered?
pivture to change right turn signal
Try checking the right turn signal light bulbs, front and back. Sometimes one of the filaments inside the bulb can break and short out causing the signal not to blink. If you do go this route you might as well change them while you're there.
Front left fork, right below turn signal. Should see model and Vin
reach up under front bumper and twist the bulb out.
assuming you mean the light bulbs, see the answer to "how do you change turn signal lamps both front and rear on a 96 mercury grand marquis" right here in WikiAnswers.
trouble putting right front signal bulb in.
you have to go inside engine compartment to the front right side,then reach in and disconnect signal/parking bulb holder electrical connector.Then rotate the turn signal bulb holder 1/4 turn COUNTERCLOCKWISE to remove it.
the socket should just turn out in the back under the hood.
pull off the front ferrings and remove the two main bolts, one on the left and one on the right
easy...: if you have the splash guard behind the front bumper in your wheel wells, remove that or unbolt it to get behind the headlights, then unscrew the signal bulb, then replace, voila! tips: turn the steering wheel left or right depending on what side you need to do easy...: if you have the splash guard behind the front bumper in your wheel wells, remove that or unbolt it to get behind the headlights, then unscrew the signal bulb, then replace, voila! tips: turn the steering wheel left or right depending on what side you need to do
behind the right side cover.
on what car