these rotors are slide on, so the are rusted around hub, you could beat them loose with a hammer or if can use air tools an air chissel with hammer end would do the trick
State exact make and model.
You will need to remove the tire and wheel from your 2005 Dodge Durango. Remove the brake pad Springs and calipers. Tap the rotors with a hammer to loosen them. Slide the rotors off. Reverse the process to install the new rotors and brake pads.
If you are wondering whether it is possible to replace one's own brake rotors or not because you drive an older vehicle that need brake rotors replaced, then the answer is no.
Leaving the parking brake on while you drive
Tap on your 1995 Ford brake rotors with a hammer or mallet?æto loosen them. Slide the rotors off. Reverse the process to install your new brake rotors.
if you are driving and you go to stop, then that means that the front rotors are warped. if the front rotors are bad, you will feel a pulsation in pedal while applying brakes. change rotors on front.
Need to know if this is a 2 wheel or 4 wheel drive S10.
Jack
Break rotors heat up very fast while drive and stopping, todays technology in my sense isn't the best on rotors. If you have a heavy foot and brake hard, that will contribute to warped rotors. Sudden stops will also case warping. Most brake Specialist (Les Shwab) recommend on new cars, and new rotors to brake easy, (light foot) on your new rotors for the first 1,000 miles of the rotors life. That way they have time to brake in.
2 wheel or 4 wheel drive, front or rear rotors, it makes a big difference.
If you can't figure this one out, take it to a brake shop and don't risk hurting yourself.
According to Motorcraft.com - YES Both the 2006 and 2007 Ranger front brake pads are # BR 11438 for all 3 available engines , 2 wheel drive and 4 wheel drive