Do this when the engine is cold only. First, remove the radiator cap. Then, locate the lower radiator hose. Unfasten this from the radiator. The old coolant will come out. Wait until the coolant has all come out. Then fasten the radiator hose again, make sure it is tight. Pour the new coolant into the radiator. Then, start the engine and let it idle. Pour more coolant into the radiator until it is almost full. Leave a space of 1 cm or so as the hot water will expand in the radiator and needs more space than cold water. Then, replace the radiator cap. Make sure the radiator hoses are not cracked or leaking. Check the coolant every week on older cars, at the same time as you check the engine oil level. Be careful with this, as the pistons will seize in the cylinders if the cooling system runs dry or even partially dry.
buy a different model Nissan sucks!!!!!
It is under the back seat next to the fuel tank.
how to change coolant on suzuki boulevard M90
how to change coolant on suzuki boulevard M90
Flush the coolant, change the coolant resevoir and add new coolant, it doesn't hurt to change the hoses either
F15
London n16
The air temperature sensor on a N16 Almera is on the air intake tube. It is between the throttle plate and the air filter.
50/50 water/coolant
Nissan n16 engines have a timing chain located behind a cover plate just above the water pump
No. Nissan N16 Pulsars have a timing chain. (Source: Owner's manual N16-A section 8-5, camshaft operation).
Standard pulsar n16 alloy wheels are 14x6 with a 45+ offset with 4/114.3 stud pattern