Remove wheel loosen and remove flexible brake line to caliper Remove 2 mounting bolts Slide caliper off rotor
Could be a frozen piston inside the caliper Could be a defective brake hose Could be a damaged (pinched) brake line
Remove wheel, remove the bolt holding brake hose to the caliper, remove the two pins that hold the caliper to the caliper bracket using a 3/8" allen wrench, remove caliper. Inspect brake pads and brake hose for damage, replace if necessary. Install new brake caliper in reverse order. Bleed system.
Take off the tire, remove the brake caliper, and pull off the rotor.
If rear brake caliper is used for emergency brakes also - piston is threaded and requires a special tool (not expensive available at Sears or auto parts) to screw into caliper housing
It is quite simple to change the brake light switch on your 1998 Chevy S 10 pickup truck. The brake light switch simply plugs in and out.
Remove the tire and wheel from your 2002 Chevy Malibu. Remove the brake spring and the brake caliper. The brake shoes will come off. Reverse the process to install the new brake shoes.
there is 2 bolts on the back of the caliper that hold it in place Allen key bold my be full of dirt use a c-clamp to press the caliper over (pushing oil out and pads apart) slide the calipers too the side (warning take care not to damage the brake line or press the brake with the caliper off)
Maybe a frozen brake caliper Maybe a frozen brake caliper Maybe a frozen brake caliper Maybe a frozen brake caliper Maybe a frozen brake caliper Maybe a frozen brake caliper Maybe a frozen brake caliper In my opinion you have to change front lower arms' bushings.
Remove wheel Re-Install 2 lug nuts to hold rotor in place Remove caliper mounting bolts Slide caliper off rotor Fully retract piston into caliper these may need a special tool if the parking brake is connected to this caliper (it is threaded) Tool not expensive available at Sears After piston retracted replace pads Re-install caliper onto rotor REMEMBER TO PUMP BRAKE PEDAL TO SET PADS AGAINST ROTOR
Remove the tire and wheel from your 1996 Chevy Cheyenne. Remove the brake spring and the break caliper. The brake pads will come off. Reverse the process to install the new brake pads.
Remove the tire and wheel from your 2003 Chevy Impala. Remove the brake assembly spring and the break caliper. The brake pads will come off. Reverse the process to install the new brake pads.