Pull the turn signal stick towards you.
They attach to the front of the car below the regular headlamp assembly.
Fog lights if equipped.
if you pull the switsh outwards
In fog you should use dipped headlights or front fog lights. Also you should use high intensity rear ( fog) lights.
Remove the fog light retaining bolt. Remove the fog light wiring harness. The fog light will come out. Reverse the process to install the new fog light.
By buying fog lights and installing them.
replacing the fog lights on our chargers require removing the front clip, which is a fairly involved task during which a lot can go wrong.
Where headlights controls are pull it out once for front fog lights and again for front and back fog lights hope this helps
The front impact sensors are mounted behind the fog lights. If you do not have fog lights, just look through the fog light position in the front bumper.
there are two bolts on the top of the fog lights, pul the entire fog light out then you will see a hatch at the back of the light. open it and remove the bult
, The headlight bulb is a #9007. The front/sidemarker bulb is a #194. The park & turn signal is a T3157. The fog lights are #893.
Fog lights are (on the rear of a vehicle) bright lights enabling the said vehicle to be more visible in fog, the lights are usually red. If on the front of the vehicle aswell they are usually white lights and are sometimes refered to as spotlights.