answersLogoWhite

0


Best Answer

I just did this today, takes about 1 to 2 hours. First, jack up the front end. Put the jack just behind the front tire, its where the manual tells you to put the jack to replace the front tire. Now, you can remove the tire for easier access, but its not necessary. I did not remove the tire. Make sure your jacked up nice and high, my tire was just off the ground. now, remove the bolt on the bottom. I used my air ratchet to remove the nut, while holding the bolt with a ratchet. next, get to the top bolt from the wheel well. I just pushed up the plastic wheel well cove so i could just get to the top bolt. You need two wrenches for the next step. first, tighten a wrench around the flat part of the bolt coming out of the top of the shock. The other wrench is fitted around the nut holding the shock in place. push the wrenches away from each other. the wrench holding the bolt went clockwise while the wrench holding the nut went counter clockwise. This takes some effort, but just keep loosening. Use a bolt loosening spray too. after the nut is finally off, pop the old shock out. Now insert the new shock top bolt first. If the bottom horseshoe fitting will not slip over the housing, jack up the car some more. If the horseshoe fitting is too high to put the bolt back in to the housing, lower the jack to where it lines up. put the bottom bolt in and tighten the nut. Now, go back in the wheel well and tighten up the bolt on the top nut. you are done.

User Avatar

Wiki User

9y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you change front shocks on Chevy Tahoe?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you change the front shocks on 2000 Chevy S10 pickup?

how to change front shocks in 01 Chevy s10


How do you change front shocks on a 1998 Chevy Cheyenne 1500?

no


Does 2004 Chevy Cavalier have front shocks?

Does Chevy cavalier have front shocks


How do you change front shocks on a Chevy Avalanche?

It will be easier if you pull off the front tires then you have the shock bolts at your reach. It took me 30 min for both front shocks.


How do you change the shocks on a 1997 Chevy Blazer?

a 4 door 97 blazer front how do i do it


How can you install the front shocks on a 1994 Chevy beretta z26?

There are no front shocks on any Beretta. Shocks are in the rear. Struts are in the front.


Are they shocks or struts in front suspension on a 2000silverado4x4?

The 2000 Chevy Silverado 4x4 has shocks in the front.


Does the 2004 Chevy Trailblazer have struts or shocks?

Struts on the front, shocks on the rear.


Do the 2005 Chevy trailblazers have shocks or struts?

Front struts. Rear shocks.


How much labor to change front shocks on 97 Chevy s-10?

The cost of labor to change the front shocks on a 1997 Chevy S-10 pickup varies greatly by the place where service is performed. As of 2014 this ranges from 41.50 per shock to 80.00 per shock.


Does a 2005 Chevy Malibu have struts or shocks or both?

2005 Chevy Malibu, shocks in rear, Struts in front.


How do you change Front Shocks on a 2001 Chevy S10 pickup?

Lift the front of the vehicle up and support it with jack stands under the lower a-frames. Remove front wheels. Unbolt front shocks and remove them. Reverse order to install.