Remove brake caliper, then caliper mounting. Now tap back of rotor to remove it. Detach tie rod end from knuckle, remove ABS sensor (this is very tricky, they stick) Remove control arm (lower ball joint) from knuckle, Now undo large nut holding hub and drive axle and pull hub off drive axle. Now remove the 3 bolts holding bearing assembly. Replace in reverse order.
-This job is quite tricky if you are not a very experienced mechanic - I would highly recommend getting the Haynes manual .
how do you change front wheel bearing for 420 rancher
The wheel bearings in the 1996 and newer Taurus / Sables cannot be greased.See "Related Questions" below for information / procedures for replacing wheel bearings.
When you change rotor or main ball joint, or when they get worn.
the front wheel bearings are a sealed unit, requiring a front hub assembly. when i bought mine it was a dealer item only
If you are referring to the front bearings, you have to buy a complete hub assembly.
how do i replace front wheel bearings on golf 1.6 2002 model
front hub removal dispatch
You can change the front wheel bearings on your 2000 Buick Regal without replacing the entire hub assembly. You can change each individual wheel bearing, if you choose.
sorry to have to tell you this but the bearings are part of the wheel hub and sealed within. you need to change the entire hub. $$$$$$$
Front or Rear? Both
screw driver
Slide off - after removing mounting bolts