Brake Pads and Rotors
Mercedes-Benz 400-Series
Ford Escort ZX2

How do you change out the front brakes on a 1994 Mazda B2300 truck?

91011

Top Answer
User Avatar
Wiki User
2006-10-01 21:28:21
2006-10-01 21:28:21

Hello, I just put new brakes on a '94 Mazda B2300. To change the front brakes pads, remove the caliper by taking hammer and punch to the upper and lower chrome triangle tabs and push them thought, then pull off your caliper. Now you can access your brake pads. Also remove your rotor you have inner and outer wheel bearings that need to be repacked and adjusted. You also have to have new wheel bearing seals, as they get torn up pulling them out to access the inner bearing. hope this helps.

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

You didnt specify what year.i have a 94 b2300 and had to replace the grill and in order to replace i had to take the front bumper off just to get to dome of the screws.so be prepared.

User Avatar

It is mounted on the front of the block at the crankshaft. It is bolted on the driver's side of the engine.

User Avatar

The front and rear brakes are both made of ceramic. i bought front and rear brakes on eBay for $80 total.

User Avatar

How do you change the front brakes on a Ford Escort- ZX2 model, 2002 model

User Avatar

There are no emergency brakes on the front wheels of vehicles.

User Avatar

it either has front disc brakes and rear drum or it has front and rear disc bakes. look for a flat disc in the front and back - those are front and rear disc brakes-they take pads. The drum brakes take shoes.

User Avatar

How do I change the front breaks on my 2002 Toyota RAV4?

User Avatar

What size wrench do you need to change the front brakes on a 2001 dodge durango?"

User Avatar

same as the front there both disk brakes just like the front

User Avatar

same as the front brakes they r both disc brakes

User Avatar

They take ceramic brakes all the way around and they change just like others.

User Avatar

The oil pump is located towards the front of the engine on the driver side. Below is an attached link with a diagram that displays the location.

User Avatar

$45.00 at auto zone for rear and 60.00 for front.

User Avatar

To change the front disc brakes on a Kia Rio, simply remove the assembly held by two bolts. Push the piston back and replace the disc brakes with new.

User Avatar

how do i change front brake pads on my 2002 polaris 500 sportsman

User Avatar

how to change front and rear brakes on a 2003 ford mustang V-6

User Avatar

what size allen wrench do i need to change front brakes on a 2004 dodge grand caravan

User Avatar

Is it like regular brakes are is there something special tool I need ?

User Avatar

what tools do i use to change the front brakes in my 2003 Pontiac grand prix

User Avatar

Check the wheel bearings and the front brakes for wear. These are the most common places that cause the roar.

User Avatar

how do i change to front brakes on a dodge durango?

User Avatar

It would be a 14 or 17 mm wrench, not Allen key. Hardly any Asian cars use Allen keys.

User Avatar

Front pads (disc brakes) Rear shoes (drum brakes)

User Avatar

I replaced the front brakes on my 92 camaro, it still pulls hard right when u hit the brakes??


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.