under the hood, at the back of the headlight assembly, you'll see a round plastic dome. This is the seal to the headlight. Unscrew it (1/4 to 1/2 turn) look for and release the 'pin' that holds the halogen bulb in place and the bulb will easily slide out of its housing. Check your manual as well, it'll have full illustrations.
Nicole
dose Mazda 6 tamura have xenon headlight bulbs 07 plate
If you look in your owners manual there are step by step instructions on how to properly change the headlight bulbs in your truck.
To change a headlight on a 1999 Acura TL open the hood and locate the bulbs which are plugged into the housings. Loosen the bulbs and pull them off. Replace them.
Before replacing the headlight bulbs on a 1997 Acura CL prop the hood open. Locate the headlight housing and remove the old bulbs. Install the new lights.
Take it to halfords matey £6 fitting worth every penny.
The headlight assembly (aka the headlight bucket) is removable by releasing the lock tabs behind the assembly. Once the assembly is wiggled out in the open you can easily replace the bulbs.
LIFT THE CLIPS AND PULL IT OUT
You need three Polocks!
The headlight on a 1985 Honda Civic is changed by lifted the hood open. Locate the housings for each headlight and find the harnesses for the bulbs. Pull out the old bulbs and replace them.
To change headlight bulbs in a 2005 Ford Escape, first make sure the light switch is in off position and replace the passenger light bulb. Next, get to the driver's side bulb, remove the battery by holding it down, to be able to change the headlight bulb.
Assuming you mean headlight bulbs... 2003 Mazda 6 headlight bulb replacement: Purchase the correct replacement headlight bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the headlight bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).