pull the tencion pully all the way back and then place it on.
There is a picture in the motor compartment.
How do you replace the serpentine belt in 1997 sunfire
http://www.youtube.com/watch?v=BdhCzA0NcDQ richpin
push back on tensioner, then re move belt.
yes
If it's a serpentine belt, all you have to do is put a socket on the tensioner pulley, rotate it counterclockwise, and that should give you the slack you need to remove the belt. You do the same thing installing the new belt, and refer to the belt diagram when routing the belt.
the 1997 camaro doe's not have a fan belt it has a serpentine belt that you can change in about 5 min.
Remove belt and tensioner should just be bolted to engine
You have to drop the subframe
change the blower motor resistor. done deal.
You need to losten the screws on the alternator to losen the belt, then you can take it off, and replace it.
you havee to remove the lower bolt on the motor mount to get enough clearance to slide it through take it to someone its faster and easier that way