Looking at the top of the engine. Look between the runners of the intake manifold and you will see six square black boxes all held on by two star head screws. Remove the screws and pull up the coil boxes, under these are your plugs. Use a deep socket to change the plugs.
remove the coil packs on top the engine with a small tork bit then change plugs
under the coil paks on the valve covers
Read the manual.
A 2000 Concorde does not have plug wires. There are individual coils on each spark plug.A 2000 Concorde does not have plug wires. There are individual coils on each spark plug.
The Concorde could misfire for several reasons. Start by checking for proper fire to the spark plugs. Then check engine compression to see if a cylinder compression is down.
Changing spark plugs is an important task. To do this, disconnect the battery and spark plug cables, and remove the old spark plugs. Next put in the new spark plugs, and reconnect the spark plug cables and then the battery.
.050
Disconnect the battery, remove the spark plug cables and boot, and remove the old spark plugs. Put in the new spark plugs, attach the cables and boots, and connect the battery.
My Chrysler 300 SRT8 with a 5.7 Hemi has 16 spark plugs
.50
.050 inch
when do you change spark plugs