Take out the two screws on each side using a Phillips head screwdriver. Pull down on the assembly until you can get ahold of it. I used a flat head screw driver to pry the flat back from the assemembly and the rubber gaskets. The bulb pulls out.
On a 2012 toyota Highlander, How do you replace tail light Assembly
Question isn't clear. Are you asking how do you replace the bulb -OR- how to remove the entire lens assembly?
how to change the rear tail light bulb on a 2004 Nissan maxima
I have a 2004 highlander. I just finished the replacement. It was very easy. Open the back door to the highlander, remove the plastic compartment cover. You will expose the nuts and bolts that hold the asssembly to the car. Remove the nuts - be careful not to drop any inside the cavity. Once you have all the nuts removed, you can remove the lamps and pull the tail light assembly off. Put the new assembly on, replace nuts, and reinstall the lamps. Easy.
Sedan or hatch makes a difference
how to change tail light bulb on Toyota sequoia
How do you change the tail light on a 2001 toyota sequoia
How do you install passenger tail light kit for a 2004 grand cherokee?
First of all pop the trunk and then use a screwdriver to pull the light out and go to Canadian Tire and purchase a new light.
i got a 2006toyota highlander my tail lights dont work but,every other light works please help me
on the tail light problem - unbolt the tail light from inside th truck -the hold tail light assemble will come out - it is recommended to change all the blubs your all ready there
to Change the tail and brake lights of a 2004 WV Beetle, open the truck, locate and remove the panel cover underneath the tail/break light. unscrew the black knob, which releases the light over outside the vehicle. use a thin object to lift the light cover off, be careful to not scratch your car, and you will see the tail/break light bulbs.