To be honest it's a long process and most of the time requires you to take out the car engine. Not for amateurs!
Changing a VW Polo clutch cable requires exposing both ends of the cable. An open ended wrench will be needed to loosed the existing cable. After replacing the cable, be sure to bleed the line to prevent failure.
I am told it is easy to replace the clutch cable on my 89 Volkswagen Fox, however I have no mechanical skills. I I had diections I am willing to learn.
No.
i think it may be able to change like with a new flywheel The clutch cable is self adjusting ,do not try to adjust!!!
BAD CLUTCH
You don't it doesnt have a cable it's all hydraulic cylinders
you're kidding right?
60,000 miles
straight from the dealer u are looking at plus/minus R15000
You don't.The unit is integrated and the whole thing has to be replaced.Sneaky VW
It is tricky to change the clutch cable. There is a clip that holds it on the clutch pedal and it hooks over the clutch arm down by the bellhousing on the other end. The clutch arm is fairly easy to access and remove the cable from the engine compartment. The clutch pedal end took a little while. I had to undo the fuse box and let it hang to acces the pedal arm. The cable hooks on this end also, but has a little clip that holds it on the arm. Once the cable is unfastened from the arm, you can pull it out through the firewall. Installation went better than removal for me, a little adjusting after its in and youre all set! Good luck!
The cable is self-adjusting meaning it is always correcting itself .you never have to touch it. Cool huh!