answersLogoWhite
Transmissions and Drivetrains
Ford Bronco
Ford Explorer XLT
Ford F-150

How do you change the fluid in the transfer case on your 1989 Ford full-size Bronco 4.9L and what fluid should you use?

798081

Top Answer
User Avatar
Wiki User
2011-09-13 00:21:02
2011-09-13 00:21:02

I used a 1/2 gallon pickle jar and a hand vacume pump. Install two fittings in the lid of the jar and attach the hose from the vacume pump to one fitting. Attach a second hose to the other fitting and put it into the transfer case through the fill hole. When you pump the vacume handle it will create a vacume in the pickle jar and suck out the fluid. It helps if the fluid is warm, and you have to keep moving the hose around. I have used this setup to remove all types of fluids.

1

Related Questions

User Avatar

The slip yoke on the Ford Bronco is located on the rear axle rather than on the transfer case. This is the portion of the axle that allows it to flex.

User Avatar

Yes it should . There is only 2 different ones. It is easy to read the tags. I forget the exact but -----54 or 58. Before you get to durty.

User Avatar

Type your answer here... no mass air flow in bronco came out in 94 1988 should have map

User Avatar

if its a full size fuel injected bronco 87 or later the pressure should be between 35 and 42 psi

User Avatar

Automatic Stabilizers - because the taxes and transfer payments change when an individuals income changes, it allows an "automatic" change that should eventually balance out.

User Avatar

If you already had one owner transfer their interest by a deed, they are still responsible for paying the mortgage. If you read through your mortgage documents you should review the Due on Transfer clause.If you want to change the ownership of the property the loan must be paid off and refinanced in the name of the new owner. If you transfer ownership without notifying the bank, it can demand payment in full immediately as soon as it discovers that transfer. Also, until the loan is refinanced in the name of the new sole owner all the parties who granted it will remain responsible for payment. You should consult with your lender if you want to make a change in ownership and the deed of transfer should always be drafted by a professional.If you already had one owner transfer their interest by a deed, they are still responsible for paying the mortgage. If you read through your mortgage documents you should review the Due on Transfer clause.If you want to change the ownership of the property the loan must be paid off and refinanced in the name of the new owner. If you transfer ownership without notifying the bank, it can demand payment in full immediately as soon as it discovers that transfer. Also, until the loan is refinanced in the name of the new sole owner all the parties who granted it will remain responsible for payment. You should consult with your lender if you want to make a change in ownership and the deed of transfer should always be drafted by a professional.If you already had one owner transfer their interest by a deed, they are still responsible for paying the mortgage. If you read through your mortgage documents you should review the Due on Transfer clause.If you want to change the ownership of the property the loan must be paid off and refinanced in the name of the new owner. If you transfer ownership without notifying the bank, it can demand payment in full immediately as soon as it discovers that transfer. Also, until the loan is refinanced in the name of the new sole owner all the parties who granted it will remain responsible for payment. You should consult with your lender if you want to make a change in ownership and the deed of transfer should always be drafted by a professional.If you already had one owner transfer their interest by a deed, they are still responsible for paying the mortgage. If you read through your mortgage documents you should review the Due on Transfer clause.If you want to change the ownership of the property the loan must be paid off and refinanced in the name of the new owner. If you transfer ownership without notifying the bank, it can demand payment in full immediately as soon as it discovers that transfer. Also, until the loan is refinanced in the name of the new sole owner all the parties who granted it will remain responsible for payment. You should consult with your lender if you want to make a change in ownership and the deed of transfer should always be drafted by a professional.

User Avatar

It is a minimum pass but below satisfactory. I can be used toward graduation in most (not all) programs of study at the undergraduate level. It will not transfer to another college or university should you change institutions.It is a minimum pass but below satisfactory. I can be used toward graduation in most (not all) programs of study at the undergraduate level. It will not transfer to another college or university should you change institutions.It is a minimum pass but below satisfactory. I can be used toward graduation in most (not all) programs of study at the undergraduate level. It will not transfer to another college or university should you change institutions.It is a minimum pass but below satisfactory. I can be used toward graduation in most (not all) programs of study at the undergraduate level. It will not transfer to another college or university should you change institutions.It is a minimum pass but below satisfactory. I can be used toward graduation in most (not all) programs of study at the undergraduate level. It will not transfer to another college or university should you change institutions.It is a minimum pass but below satisfactory. I can be used toward graduation in most (not all) programs of study at the undergraduate level. It will not transfer to another college or university should you change institutions.

User Avatar

If you are in a transfer program of study particular to business, and did well, there should be no problem in transfer to a four year college or university.If you are in a transfer program of study particular to business, and did well, there should be no problem in transfer to a four year college or university.If you are in a transfer program of study particular to business, and did well, there should be no problem in transfer to a four year college or university.If you are in a transfer program of study particular to business, and did well, there should be no problem in transfer to a four year college or university.If you are in a transfer program of study particular to business, and did well, there should be no problem in transfer to a four year college or university.If you are in a transfer program of study particular to business, and did well, there should be no problem in transfer to a four year college or university.

User Avatar

Keldeo doesn't change forme in black and white, you have to teach him secret sword and transfer him to black 2 and white 2 when those games come out, he should change then

User Avatar

yes they will interchange . you should have mo major problems switching them.

User Avatar

If you are in 9th grade and want to change schools because of different good reasons, it is possible. Your counselor may have told you it was too late because she doesn't think you should transfer in the middle of the year.

User Avatar

There are different rules in different jurisdictions. You should inquire at the court with jurisdiction and the court you want to transfer to.There are different rules in different jurisdictions. You should inquire at the court with jurisdiction and the court you want to transfer to.There are different rules in different jurisdictions. You should inquire at the court with jurisdiction and the court you want to transfer to.There are different rules in different jurisdictions. You should inquire at the court with jurisdiction and the court you want to transfer to.

User Avatar

A small 86 HP 2.3L 4-cylinder diesel engine was offered through 1987 on Bronco II's. Bronco II's were made from 1984 to 1990. so if you find this engine it should fit your Bronco II. I researched this before i answered your question so i knew it would be correct!!! good Luck!!! A small 86 HP 2.3L 4-cylinder diesel engine was offered through 1987 on Bronco II's. Bronco II's were made from 1984 to 1990. so if you find this engine it should fit your Bronco II. I researched this before i answered your question so i knew it would be correct!!! good Luck!!!

User Avatar

If an employer is transferring an employee, the letter should include the location of transfer. The letter should also include when and the reason for the transfer.

User Avatar

should be on the inside the drivers side frame rail

User Avatar

Stock should be a 15x7 or a 15x8 depending on the package.

User Avatar

should be black and have a red button on top The inertia switch for the 88 Bronco should be behind the left side of the dash, above the brake pedal. The inertia switch for the 88 Bronco II should be under the right side of dash, on the firewall. You may need to pull the floor mat down a bit to see it.

User Avatar

If it is a full faith in credit transfer, it should take an additional two years.If it is a full faith in credit transfer, it should take an additional two years.If it is a full faith in credit transfer, it should take an additional two years.If it is a full faith in credit transfer, it should take an additional two years.If it is a full faith in credit transfer, it should take an additional two years.If it is a full faith in credit transfer, it should take an additional two years.

User Avatar

it should be located on the back passenger side of the tranny...mine just went and my bronco wont shift gears it stays in second... i plan on fixing it tomorow

User Avatar

In order to write a letter of transfer to a school, your letter should contain a date, a proper headline and the school's name and address. The summary should be very brief but should also detail as to why you want the transfer in the first place. The final paragraph should show your gratitude for the school transfer in the form of a simple thanks.

User Avatar

On the 88 Bronco it should be just above the engine oil filter.

User Avatar

It should be along the Frame rail on the driver side about half way.

User Avatar

Oil pressure varies but should normally be around 40psi


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.