You first need to remove the black plastic covering by unscrewing the big plastic bolts. They just unscrew so don't try to remove. Look down where your headlights are and there should be plastic clips (mine are blue and white) you need to push on the lever on the bottom of the plastic clip at the same time as you are pushing down. ( I cheat and use tools for additional muscles, a flat screwdriver works best) It should come off disconnecting the power from your headlights. There should be 3 spots where lights can go, hi-beams, headlights, and turn signals....determine which one needs replacing. Turn the back of the light clockways and it should pop out carefully. Replace and turn counterclock ways until light is locked back into place. Replace clips and black plastic cover.
Before replacing the headlight bulbs on a 1997 Acura CL prop the hood open. Locate the headlight housing and remove the old bulbs. Install the new lights.
There are dozens of torque specifications for your 1997 Acura 3.2 liter engine. A complete list of torque specifications can be obtained from most Acura dealerships.
how to change head gasket on 1997 acura
There
change a headlight on a 1997 plymoth voyager
See following link: http://www.partsgeek.com/catalog/1997/acura/rl/air_intake/cabin_air_filter.html
You need three Polocks!
when to change please - # of years, # of miles?
The brake lights are located in the trunk of a 1997 Acura Integra. To replace them open the trunk and find the plastic housing. Remove and replace the bulbs.
How to replace or change the 1997 Dodge Caravan 3.3 liter engine
If you look strait at the headlight on the turn signal side you will see a small screw. remove it and the light should come out.
The screw is used to adjust the headlight beam. Pull towards a wall, and you can see the beam projection to set the headlights evenly.