There is a small plstic cover over the bulb housing with two screws. Remove both screws, pop off the cover and expose the burned out bulb. You will just need to pull on the bulb. I suggest you pull carefully so as not to break it, but it is just a slip in so keep pulling until it releases. By the way the replacement bulb is a size 168.
How to change the bulbs in the climate control for a 1999 Chevy trailblazer
Change brake light bulbs Just remove the rear license plate. You can change the backup lights and brake light easily.
the plug on the back side of the bumper twists to the left and you pull it out of the bumper
yes,4 separate bulbs,2high beam-2 low beam
bend over sheave it up ur asss
You can do this with using different bulbs. The best was to change these is by using the users manual.
your bulbs might be blown, if not, try your wiring harnes, see is it has nics or cuts in the wires. or you blew a fuse
push up and turn on the housing
You have to open the rear hatch like you would to replace the reg. brake lights. Screws should be accessible once hatch is fully open.
you need to remove the inside panel to get to these bulbs
9006 is the number...Wgner makes a great bulb....make sure the socket isn't melted, as Chevy can't seem to solve that problem.
How_do_you_change_the_fog_lamp_bulbs_on_2002_Chevy_Impala