there are two tourqu screws one on each side undo thes and slide out light then release the clip on the bulb from the back side and slide out the bulb
It is very easy to change the license plate bulb in a 2001 Dodge Intrepid. You will need to remove the tag and then unscrew the light cover. After the cover is off, unscrew the light and replace with a new one.
3157LL
Bulb, wire, fuse, etc.
With the hood up look at the outer end of the Headlight, You will see what looks like a snap together piece. wiggle the corner light and this will help you to see the clip that has to be moved in order for the light to slide out so you can change the bulb...I myself just put new headlights in my 96 dodge intrepid.
There are three plastic nuts accessible from inside the trunk.
Pop the trunk, remove the "3 wingnuts" behind or on the carpet. That will in turn loosen the tail lights. Turn the bulb, and voila!
The original is a #192, but is no longer available. Suggested use is a #194
How do you change bulb in abs dashboard\
pull the whole light down from the head liner (it is just held on by 2 clips it will not break )then you pull the light itself from the holder change it and reinstall the complete light assy. to the head liner
The 2001 Dodge Intrepid front turn signal lamp bulb number is 3157A. See sources and related links below for pictures and more bulb information.
Lower the tailgate and the screws will be on the bedside. Remove the screws and pull the light bulb housing out. From there you should be able to see how to get the bulb out of the housing.
1994 Dodge Intrepid Fuse Issues: Your owner's manual is the best place to locate your fuse box(es) and identify your fuses. Don't rule out that your issue is being caused by a bad bulb too - so check fuses and bulbs. See sources and related links below for bulb information.