UNLESS YOU'VE NEVER DONE BALL JOINTS -------DON'T----------- IF YOU DON'T KNOW WHAT YOUR DOING - THE COIL SPRING CAN -KILL YOU- Find somebody that has, there is MANY THOUSANDS of POUNDS of PRESSURE (if) the Vehicle ISN"T jacked up correctly.a Ball Joint Press is the best,but a Large socket & a large hammer is one way IF U have done it B 4.
take old ones out... put new ones in
How do you change the lower ball joints on an 2004 envoy
If its 2 wheel drive, you will need a press. Those ball joints are pressed into the upper and lower control arms. If it is 4 Wheel drive you need to remove the rivets with either an air chisel or to drill them out.
You change the control arms, upper and lower. The ball joints are manufactured into the control arms.
Lower the steering column.
You have to change the whole lower control arm.
How to change upper and lower ball joints on a 1997 ford explorer all wheel drive?
It's on the lower right side of the block
The ball joints are riveted or pressed into the upper and lower control arms, then the spindle is bolted to the ball joints.
Change lower ball joints on a 96 gmC 4 by 4
They are exactly the same.
If it is a 4+4, the lower ball joints wear quickly.