0
How do you change the oil filter housing from a mk2 to a mk1 saxo?
Wiki User
∙ 14y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Will a mk2 saxo wings fit on a mk1 saxo?
yes then you need to change the bonnet and slam panel and lights
Can you put citeron saxo mk2 lights on a citeron saxo mk1?
Yes but you would have to change the bonnet/front wings and slam panel.
Will a mk2 saxo bonnet fit a mk1 saxo?
go to this link on face book : http://www.facebook.com/media/set/?set=a.168004076626488.39852.100002506913934&type=1&l=73dc15d0a6 you would have to change a lot more to do this .im willing to help if your face liftin the mk1 saxo
Can a Mk2 saxo vtr pas pump on mk1 vts?
yes it can.
Where is the central locking sensor on a saxo?
above the rear view mirror near the interior light and sunroof handle, mk1 saxo vtr
IS it possible to fit mk2 gearbox into a mk1 citroen saxo 1.1?
Yes same size
Will a mk2 saxo axle fit a mk1 1.1 saxo?
yes it will only difference is some are drum and some a disc just match whats on your car :-)
What is the difference between the age of a citeron saxo mk1 and mk2?
If i am correct the mark II's replaced the mark I's in the year 2000
What bulbs will fit in a mk1 saxo as i want to put some blue ones in there. anyone know where i can get them from?
loads of coloured headlight bulbs on ebay
Which way do you unscrew the oil filter on a 1983 mk1 golf gti?
Turn counterclockwise.
How do you change the air filter in a MK1 04 Citroen C2 VTS as there are no clips on the box and the screws appear inacessible at the back?
unscrew air filter that joins onto the intake manifold take the battrey covers off and pull the air filter out it comes out as a whole
How change pollen filter mk1 focus 1.8 tdci?
Ifound out how to change pollen filter 2002 ford focus tdci,on passenger side below wiper there is a plastic cowel the screw is under the round plastic disc on the left the other two are not screws.prise off the disc and remove the screw then carefully lift away from from the back.If there is silicon on it you will have to run a knife along the side nearest the windscreen.when plastic cowel is removed you will see the filter.lower the front of filter housing and pull out the filter,replace with new filter and silicon the cowel to stop water leakage into foot well replace screw and round disc job done.if water gets in it will blow the blower resister which is behind the glove box. 10 pounds for a new one off e bay.easy to change.
