1. Remove the drain plug at the rear of the oil pan. Allow oil to drain. 2. Unscrew the old filter. Make sure that the old o-ring comes off with the filter, or the new filter could leak. 3. Apply a light coat of oil to the gasket on the new filter. 4. Hand tighten the new filter, and then tighten an additionial 1/4 turn. 5. Reinstall the drain plug. 6. Fill with 4.5 quarts of oil. *Note - Some 98 models have a remote oil filter assembly. The oil filter is centered beneath the radiator. If you have skid plates, there is an access panel underneath the filter, just look under the front of the truck and you should see it.
The oil pressure switch on a 1998 Chevy Blazer is on the side of the engine block. It is located above the oil filter.
in the oil pan
The oil cap on a 1998 Chevy Blazer is located on the passenger side of the motor. It is just to the left of the manifold cover.
5w30
The transmission dipstick on a 1998 Blazer should be located at the rear of the engine. It should not be near the oil dipstick.
1998 Chevrolet Blazer did not have vent windows.
five quarts
on the back side of the oil pan.
How do you change gear oil in a 1998 expedition?"
It is located in the fuel tank.
Most carwashes have an Oil Change center. You should probably take it there/
5 quarts