You'll need to disconnect the motor mounts, lift the engine about 6 inches, remove the pan (after you remove the oil would be best) then the oil pump will be visible. Be aware however that if you have low oil pressure it's probably not a problem with the oil pump. You could pull a bearing cap and look at the surface. If the bearing material (babbit) is worn off, you probably need an engine rebuild to solve your problem. Just a suggestion, take it for what it's worth; before pulling the engine apart try changing to a heavier grade oil. If you've been using 5W15, change to a 10W30 or even a 15W40. If the bearings are worn but not totally gone you will be able to get a lot more life out of the engine. The recommended oil is great for a new engine but once it's been around the block a few times stuff starts to wear out. Using a heavier grade oil can help you get some more miles out of it. BTW, if that solves your problem, there is nothing wrong with your oil pump. If you don't want to change your oil right now you could try a little STP or other oil thickener to see if that helps. The principle is the same.
remove front of engine and remove timing belt It runs the pump
my engine runs hot on my 2000 dodge caravan how can i tell if its the water pump i already change the thermostat does not help
if this is a diesel, it is the easiest water pump to change remove serpentine belt remove water pump. install new pump reinstall serpentine belt pump is on front of engine just left of fan as you stand in front and look at engine
I think the engine has to come out for that. Ger a manual on your car and read all about it.
Disconnect the fuel filler hose, drop the gas tank, remove the pump.
It cools the engine!
How do I change the oil pan gasket on a 1999 Dodge Intrepid with 3.5 engine, what is the proper torque for the bolts.
The water pump on a 2004 Dodge Stratus 2.7 L is inside the engine, driven by the timing chain.
Full size 1994 Dodge Van does not have a timing belt, but instead has a timing chain and gears on front of engine behind water pump.
How do you adjust the full power screw in on the VE injection pump on 1993 dodge diesel
To pump the coolant through your engine, to keep it from overheating.
How do I change a water pump on 1998 dodge ram v10 2500. I need a picture to