Marker light is spring loaded into New Beetle...it is a complete assembly...be careful not to crack the lens cover...
Very carefully(to avoid scratching paint) use a flat head screwdriver to pry entire assembly out of bumper...start prying on the side facing closest to the front of the vehicle ...
Light bulb wiring harness can now be easily accessed. Pop marker light assembly back into bumper...You are good to go!!!
under the bumber there are holes on wach side right behind the wheels the bulbes are in those holes
www.vwvortex.com they have the answers, you have to power
you push in front of lens into bumper, and than slide lens into bumper and it will pop out, then change bulb by pulling socket out.
How do you change a tag light on a 2002 impala
There's a Phillips screw at the top of the marker light. You would need to unscrew that and then you will be able to remove the side marker light from your Toyota 4Runner. We have also included a link to a video in the related links section below.
The Dealer has a special tool to pop out the lens, usually no charge or you can pop it out yourself, be careful, it's really a tight fit.
2002 what?
how to change a brake light on 2002 Nissan altima
change backup light 2002 cadillac deville
It may be spring loaded and the whole unit can be pryed out while being careful not to scatch the paint. I'll let you know if it works after I try it next week.
On my 2002 Nissan Xterra I had to remove 4 screws from the front bumper and wheel well and then I was able to get to the back side of the side marker light and remove the nut in order to get to the light bulb.
On my 2002 Nissan Xterra I had to remove 4 screws from the front bumper and wheel well and then I was able to get to the back side of the side marker light and remove the nut in order to get to the light bulb. i don't need to change just the bulb. The entire light assembly must be replaced. The reflector is broken. i cannot get wires to release.