Okay first disconect the neg cable from your battery>DO THIS FIRST.
Then you may want to jack up the van, make sure the backtires are blocked. I would recommend using stands under the front supports. Now look on the side of the engine. You will see your flywheel. That's the part on the backside of the engine. Some models require you to take off the inspection plate first in order to unbolt the starter. Go out and look up astro starter in a parts catalog so you get a picture in your mind what it suppose to look like. Sounds stupid, but better then sitting underneath wondering. Now about the inspection plate covering the flywheel. This is a little 9 bolt half moon shape item. To the right should be the starter. Now disconnect the large wire first.-YOU DID Disconnect the battery Right!. There should be a smaller one too. Remember where the smaller one goes to. After that a 9/16 socket should take off two long bolts. If the bolts are different leangths keep that in mind. Putting it back on is reverse order.
Now you might depending on how much room you got want to have a little box or stand to put the starter on when your trying to mount it back on. I am a little guy so it got heavy after awhile. Also be carefull of the little nut on the starter and do remember which post it went on. alternators,starters, door handles, resistor pack , wp, vac lines, have replaced them all on mine. good luck and be carefull underneath there.
The voltage regulator is built into the alternator.
The Starter is accessible from beneath the vehicle
Remove the positive cable from your 1988 Chevy Astro battery. Remove the cables from the front of your starter. Remove the starter retaining bolts. Reverse the process to install the new starter.
Remove the positive battery cable from your 1999 Chevy Astro battery. Disconnect the cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install the new starter.
On the wheel cylinder. Assuming you meant brake bleeder.
How do i change the window on a 95 chevy astro van
Follow the main part of the positive battery cable down to the starter. Mark
Just northeast of the starter fluid container
How do you change a heater core in 1994 chevy astro van?
The cost to replace a 1995 Chevrolet Astro van will vary depending on the labor costs and the part cost. The price for the starter starts at $46.00 dollars.
Get a mechanic to help you out. He will know how to change it.
Do parking and taillights work? If not check fuse--common circuit
Before anything you have to remove negative battery cable to avoid to get a shok from that. You will have to release the bolts to replace the starter.
its located on the bottom passenger side of the motor in front of the transmission
There is no such thing as a 310 Chevy truck.
It's pretty straightforward. Locate it (look in the vicinity of the flywheel), unplug the electrical connections, unbolt it and remove, then do the reverse order in putting the new one in.
Remove the positive cable from your 1999 Chevy battery. Remove the cables from the starter. Remove the starter retaining bolts. Reverse the process to install the new starter.
Where is the temp sensor on a 91 Chevy astro
on ebay search for NEW STARTER CHEVY 4.3L S10 BLAZER, C SERIES TRUCK 99 00 01 02 03 04 & ASTRO VAN this gives you an image.
A) Drive to dealership. Select new vehicle. Trade your Astro for new vehicle. B) Push Astro off a cliff. Walk to dealership and get a new vehicle.
how do u replace the starter on a 95 chev lumina?
How to change a starter in 2005 Silverado v 8