Follow the upper rad hose from the radiator to the engine and ther it is. When replacing it make sure the spring goes toward the engine.
but that would be iff you had an 1993 cobra. buz that's the first year for the fox body version
its an forgine peice of junk
1964 1/2 Shleby mustang 1965 Mustang GT 1966 Mustang GT 1967 Mustang GT 1968 Mustang GT/CS 1969 Mustang Mach 1 1970 Mustang Mach 1 1971 Boss Mustang 1972 Mustang Mach 1 1973 Mustang Mach 1 1979 Mustang 1982 Mustang GT 1983 Mustang GT 1984 Mustang GT 1985 Mustang GT 1986 Mustang GT 1987 Mustang GT 1988 Mustang GT 1989 Mustang LX 1990 Mustang GT 1991 Mustang GT 1992 Mustang GT convertible 1993 Mustang GT/Saleen(possible) 1993 Mustang Cobra 1994 Mustang Cobra/GT 1995 Mustang GT 1996 Mustang Cobra 1997 Mustang Cobra 1999 Mustang Cobra 2001 Mustang GT/Cobra 2002 Saleen Mustang S-281-E/Mustang GT 2003 Mustang Cobra 2004 Mustang GT 2005 Mustang GT 2006 Mustang GT 2007 Mustang GT 2008 Mustang GT P.S. Shelby used to be the original mustang owner in the 1960s but in later years was bought out by Ford -Doug
You Can Put a 1988 Transmission In a 1993 Mustang Body.
how do you change a thermostat on a olds cutlass supreme 1983
The horsepower in the 1988 Ford Mustang 5.0 was 225 horsepower
220 horsepower for the high output 302 in a 1988 Ford Mustang
Defective heater control valve or air in cooling system.
well i just recently did a heater core in a 1988 mustang gt 5.0 and i used aprox 5 tools (nothing special) and it took about 4 hours (including supper)
How to put manual transmission on mustang 1988
Remove the water supply hose from your 1988 Chevy Cavalier thermostat housing. Remove the thermostat housing bolts. Lift the old thermostat out and drop in the new thermostat.
Yes. The motor and transmission will fit but you will need to redo the front springs and possibly change motor mount locations. I have a 1988 mustang lx with a ford 460 sitting in it.
Cobra Mission 2 - 1988 is rated/received certificates of: Hong Kong:IIB West Germany:16
The horsepower on the 1988 Mustang was # 90 horsepower 2.3 liter engine # 225 horsepower 5.0 liter engine
With engine oil filter change : 5.0 quarts ( 4.7 liters ) of engine oil
Drain the water from your 1988 Chevy Corvette cooling system. Remove the water supply hose from the top of your thermostat housing. Remove the thermostat housing bolts. Remove the thermostat. Reverse the process to install the new thermostat.
Depends on how old and how the older one was equipped
It certainly ought to.
The gear ratio for a 1988 Mustang is 3.45:1 on a standard (four) and 3.73:1 optional (four)
Yes they will bolt down with no modifications
I believe that is 210 horsepower