Want this question answered?
Remove the wiper arm from your 1999 Oldsmobile Cutlass wiper motor. Remove the wiper motor wiring harness. Remove the wiper motor retaining bolts. Reverse the process to install the new wiper motor.
how do you replace the wiper motor pulse board on a 1999 Chevy Silverado 2500
it is located on the front of the wiper motor.
(1) Pull the rear wiper arm cover back to access the wiper arm retaining nut and detach the nut and pull the wiper arm straight off the shaft. (2) Open the rear hatch glass and remove the rear wiper motor cover. (3) Disconnect the electrical connector from the motor. (4) Remove the motor mounting screw and remove the motor. Installation is the reverse of removal.
The windshield wiper motor is under the front cowl. After removing the cowl the motor should be easily accessed for replacement.
disconnect the cable from the negative terminal on the battery. remove the left side wiper and cowl grill. remove the wiper linkage assembly bolt and nut. remove the wiper link and unplug the electrical connector. remove the motor assembly to chassis bolt, detach the motor from the bracket and lift it from the cowl opening. put the new one in in reverse.
If your question is regarding the Ford Windstar, the answer is that the glass is exactly the same size / dimension. Yes, it will fit.
which fuse feeds the rear wiper for the pathfinder 1999 LE
Take it out with your muscle.
remove the cowl & wiper arms (mark location of arms on the windshield). disconnect the battery, Disconnect wire connector at wiper motor & remove the 4 mounting bolts then remove the linkage from motor.
Should be located under hood at the center rear of engine on firewall--may have to remove plastics screen and guard to access
Look against the firewall at the center area