Want this question answered?
Resistor is a separate unit from the blower motor
It will be located somewhere in the path of the air that the blower motor blows.
Check the resistance on the blower motor.
Check to see if you are getting power to blower motor - if so replace blower motor If not check fuse, switch, resistor pack.
If it's a fan speed issue check the blower motor resistor & the blower motor. Check the plugs at the resistor and blower motor for burn marks also.
Check to see if you have 12 volts at the blower motor. If yes then the blower motor is bad. If no, then the resistor, relay, or fuse is bad.
If you are saying the blower motor will not work, then check the fuse. If the fuse is not blown, then it is possibly a defective Blower Motor Resistor Pack, blower motor, or blower motor speed control switch, in that order.If you are saying the blower motor will not work, then check the fuse. If the fuse is not blown, then it is possibly a defective Blower Motor Resistor Pack, blower motor, or blower motor speed control switch, in that order.
where is resistor pack on 2010 impala lt 6 cylinder 3.5 motor
The fuse. The blower motor speed resistor. The blower motor relay. The blower motor switch. Check for power at the blower motor connection.
Recommend you check the blower motor resistor.
A malfunctioning blower motor resistor will cause the blower motor not to work. When the resistor is bad the blower motors will not turn on.
To test the blower motor resistor, unplug the resistor connector. Each blower motor switch input terminal on the resistor must have continuity to the resistor output terminal, which is connected to the circuit going to the blower motor. If the blower motor resistor continuity does not check OK, replace the faulty resistor.You need a multimeter to test the resistor block and there should be continuity between all terminals.