The fuse.
The blower motor speed resistor.
The blower motor relay.
The blower motor switch.
Check for power at the blower motor connection.
Should be behind the glove box. The blower motor speed resistor is located under the hood, on the firewall, passenger side, close to the blower motor.
take it to a shop and have them do it If it's the same as a pickup, take out the glove box and the resistor should be on top of the heater box. Not much too it.
Check to see if you are getting power to blower motor - if so replace blower motor If not check fuse, switch, resistor pack.
On gasoline powered boats, the blower should be operated after refueling and before starting the engine.
Open the hood ...it should be on the left side of the firewall...right off of the blower motor box...
should be under the hood on the passenger side see a black casing with hoses goin in it need to cut that with a razor blade blower motor right underneath it and replace casing with black adhesive and ducktape bottom to hold it together takes about 15 mins. to dry adhesive
On gasoline powered boats, the blower should be operated after refueling and before starting the engine.
look on the firewall and there should be bolts that come out around the blower motor and then it just pulls out.
never done it on this model before but the one's I have replaced, I had to remove the glovebox and the blower motor is usually behind it. should be a couple of bolts holding it in. remove them, replace motor, replace bolts, viola, you're done. on a 97 its up under the dash didnt have to remove the glove box
Under the hood, on the firewall, passenger side, close to the blower motor. If the blower motor resistor is burned out, you should still have the high speed function.
10,000 dollars
We replaced the temperature gauge in my 1991 Chevy blazer what is the normal operating temp?