They are made from haevy steel to maintaint the effectivnes and the strenght of the connecting rod. When the compression accures in a combustion chamber pushehs the piston down and the connecting rod. They need to be strong otherwise they will crack and the engine will blow up.
i also want to know the answer.... thanks in advance
Easy way is to remove the cylinder head and the oil pan. Then unbolt the cap on the lower side of the connecting rod, then slide the piston out of the top of the engine where u removed the head. Its alot more work than most people think.
It is about 14 days after your last period ended. Here's a good site: http://www.fertilityfriend.com/p/163/index14.html?gclid=CNDdwsGw3JACFQqwQwodKhvUWA It will help you to calculate when you ovulate because everyone is different
to keep moisture out
A connecting rod connects the piston to the crankshaft - A piston rod (also called a wristpin)connects the piston to the connecting rod.
Rod bearing (short for connecting rod bearing) Is the bearing where the connecting rod is attached to the rotating crankshaft.
Connecting rod journals are the part of the crankshaft where the connecting rods attach to. There is one rod journal for each piston/connecting rod in the engine. These journals have a machined surface so the connecting rod bearings can move smoothly as the crankshaft rotates.
The connecting rod has a "wrist pin" which goes through the side of the piston and through the connecting rod. It is one of the most critical fit parts of an engine.The connecting rod or con rod connects the piston to the crank or crankshaft!!!
what is the main and connecting rod for a gmc 2.2l
The connecting rod has a "wrist pin" which goes through the side of the piston and through the connecting rod. It is one of the most critical fit parts of an engine.The connecting rod or con rod connects the piston to the crank or crankshaft!!!
80
Any damage on a connecting rod means it must be replaced!!!
You need a hydraulic press to press the pin into the piston and through the connecting rod
11/32 Connecting Rod 38-44 3/8 Connecting Rod 40-45
The connecting rod caps can lock up the motor if they are installed backwards. This makes it important to mark the connecting rod caps when removing them to prevent this problem from happening.
If it is a connecting rod or bearing--be prepared to put in a new motor