You do not state the year of your Renault.
Unless it is a very early model, It may not have a carburetor to find.
It will have a fuel injection system instead.
Yes you can clean it. Remove it and spray it with carburetor cleaner and clean the tubes out with a small screwdriver.
Cleaning the carburetor is pretty simple. While the car is on, spray carb cleaner into the carburetor and wipe it with a dry lint free rag. A person can also take the carburetor out of the vehicle and clean it bit by bit.?æ
Carburetor cleaner is a chemical spray which is used to remove buildup and deposits from carburetors. It is designed to safely clean without damaging the surface.
Either with a spray available at auto parts or Wal-Mart and fuel additive or dismantle and rebuild
Change the spark plugs and wires. Clean the carburetor (at the very least with some spray carburetor cleaner purchased from your automotive store).
After unbolting the EGR valve, clean it with a carburetor spray. Allow it to dry completely before reinstalling the valve.
A common cause for an automatic choke to stick in a 318 Dodge truck is a dirty carburetor. A spray can be used to clean the carburetor to stop the choke from sticking.
To clean the carburetor on a 2005 Honda TRX450R , you will need a Philips head screw driver and carburetor cleaner along with patients. Follow these simple instructions: Remove the front plastics, fuel tank and take shroud. Using a Philips head screwdriver, remove the two brackets. Then remove the carburetor and the float on the bottom. Remove the jets and either spray or soak in carburetor cleaner. Hint: if you see daylight through the jets, they are clean.
how do i fix leaking spray pump on a 2 barrel carburetor
Just spray some carburetor cleaner into the carburetor and then let the car idle for a bit. In addition to the above answer add a can of Seafoam or Techron fuel system cleaner to a full tank of fuel once each year.
Yes and on all the linkage.
Purchase a can of spray carburetor cleaner and spray all external linkage until it is clean. If that does not help, then you need to clean the air intake plenum, and butterfly. If the vehicle is fuel inkjected make sure you purchase a cleaner that is safe for sensors.